S4 Phono Jack issues
Bought an S4 of DJTT, just a couple weeks ago I noticed a couple issues with my phono jack. It is not an issue with my earphones or my 1/4 to 1/8 jack. It seems that it is the input problem. Not sure what to do - thanks.
unscrew the slim nut on the headphone jack, thats usually the culprit!
What exactly is the issue?
Upon inserting the phono jack, I can only hear sound from my right and not my left. If I tweak it a little bit I can hear both without the bass and if I pull it out a little bit I can hear sound from my left and not my right.
Check that the balance didn’t get turned in the software. That has me going for at least a full day once. The nut in the headphone jack may very well be the culprit though.
Its not a software problem, I’ll try the nut solution for now.
^^This^^
I had the very same issue. I fixed it by unscrewing the Hex nut and tightening it up again.
Ive given this advice to many many people and it nearly always works.
I bought an s4 3 days ago and I have exactly the same problem.
I tried the screw/unscrew technic but with no success.
But couldn’t find where to set the balance for the jack/channel3&4 line… anyone can help me?
cheers
After further investigation, it seems its the channel4 who is not working properly.
Had a look at NI forum, some threads re this issue exist but no one gives an answer.
Should i give the unit back to the shop?
Dumb question, how do you unscrew the “slim nut”…? Thanks.
I unscrewed it by just using my fingers it might be a little hard at first but its pretty easy.