Sosik's VCI-300 2D TSI [BETA]

Here is how it should look like. Check the attachment.

Thanks, I’ll give a try tonight when I get home. Can’t say it enough but thanks again.

Thanks for an awesome mapping! I think this is the best one I’ve found so far, but the navigation is a bit less than intuitive…I guess because I’ve never used itch with my VCI-300, I only know how to use the Traktor browser the way I’m used to…but anyway, here’s my question:

I use SYNC, and with this TSI, everything works great until a while into a mix when al of a sudden cant get one deck to return to 0.0% pitch. It gets stuck at .1% (or some other amount) and then when you try to SYNC, the other deck WILL NOT set itself to the same BPM, because the MASTER deck won’t go to 0%.

The ONLY way to get it back to 0% so I can match with SYNC is to close Traktor and reopen it, which CLEARLY isn’t going to fly during a live gig.

Help?

The 0.1% problem came with 1.1.1. I’ll try to fix it when I get to my controller. Also today while a “small” gig I noticed scratches are a bit of annoying. So I will post fix for that as well. Too bad TPro is fcking up the jog signals…

“I only know how to use the Traktor browser the way I’m used to”
As I said, I’m a total newby. Elaborate on the browser and Ill try to enhance browsing control as much as I can(or as much as TPro allows).

I’m using 1.1.2 and it still gets stuck at the non-resettable pitch so SYNC won’t work. Probably a NI problem?

As far as the browser, it’s OK the way you have it, but in my opinion (which may not be a common consensus) the common-sense way to have the center dial work would be to click left to move left in the browser, click right to move right (ie. from the tree on the left to the individual songs on the right), and when you click the center, it would open the tree (or folder).

As far as your note on the scratching, that hasn’t worked for me, when you scratch, it only seems to “catch” in the software 10% of the time, the rest of the time, the song just keeps playing while I scratch.

I got what you mean. I tried to make browsing more Itch-like but you can easily remap browsing to your needs, I added description to some of the functions.
The scratching works always for me, you just have to make sure you have the SCRATCH button ON at the left or right deck.
Ill try to improve the mapping this week when I get more time. Thanks for your feedback!

I opened up the mapping preferences, but it looks like a foreign language to me! I hope to eventually get into it, for now I just need to get one TSI that works well at a live gig, and yours so far is the most likely!

I’ll post a video of what the scratching does for me…I can’t get it to work very well.

Thanks!

Is there a way to just make a TSI for just FX routed to a Nano Krontrol Pad. Where I can add this to TSI?

thanks soulst!!! this helped me a lot in understanding how the midi mapping works in TSP. oh and FIRST POST!

Definitely the best VCI-300 map for traktor pro (for me anyways :smiley: ). Scratching works good enough, effects section is very intuitive. Now only the LED-strips have to work :stuck_out_tongue: is the problem already resolved where the performance would drastically lower when you use the LED-strips?

I cant get headphone cueing to work? What am I doing wrong?

did you activate pfl-a / pfl-b? did you set the cueing channels in the traktor pro settings? did you turn the monitor level knob? did you set monitor select to cue?

Thank you.

Played now around with it for a couple hours and i love it.. excellent work!
its mucho appreciated! Dont get fx2 to work, and I dont understand cue points in traktor - but otherways its lovely!

I got both FX2 and Cueing to work perfectly. Just needed som adjusting in audio preferences. NB The master/cue button should be inversed so as to work logically for a DJ. When rotated towards master, you only hear master in the headphones, when rotated towards cue, you get both master and the selcted PFL (A or B) in a mix until eventually you only hear the cue when the knob is turned completely to the right. You mapped it the other way around Sosik. Extremely clever mapping of FX and now my VCI 300 works just like my TT`s and Pioneer DJM600 mixer if I dont turn on FX. Perfect!

I can’t cue in headphones either, the cue button is on, volume up and fader knob set to cue, no sound at all. How did you fix it?

FX Advanced (Right side)

The FX Advanced (Right side) is not working, can anybody help me please?

rob from holland

I can help.

First of all go into preferences-Midi Mapping and locate the master/cue knob. You have a choice to invert the knob. Do it and the index on the VCI under the knob will be correct (moves exactly in the oposite direction of the knob that is called mix in the global view of Traktor).
Your output settings needs to be adjusted. Choose internal mixer and set master output to VCI-300 channel 0 and channel 1. Always remember that right/left needs to correspond in respect to odd- or pair number. When you have done this, headphone cueing will work perfectly with this TSI.
To activate FX advanced you also need to check your preferences under FX. Make sure that the same options are selected for both FX1 and FX2 except for the fact that FX1 is set to chained and FX2 is set to Advanced.
To activate FX2 on the VCI you need to press Shift and the Pitch Bend down button (small black buttons next to the pitch fader.). Activating both FX1 (up) and FX2(down) is done on both sides of the VCI depending on which deck you want the FX to apply to. Either both A and B (small red leds on both left and right) or A or B (leds on left or right) or none (no leds) :slight_smile:. NB use Soulst explaination of this TSI to better understand this, his definetly more eloquent then I am.

Hope this helps a little bit. Could have posted my settings if I only knew how to do it:slight_smile:

PS: Techtools has promised a mindaltering TSI for the VCI-300 to be released soon! :slight_smile:

[QUOTE=Ivan77;45343]I can help.

thanks for helping me, it’s still not work proper but i try to fix it!

Tell me some more about your problem and I`ll try harder:slight_smile:

I also need help with this TSI and a friends PC. My mac works fine but on the PC I only get 2 in and 2 out from the VCI in the output routing. Why is this? I get 4 in and 4 out on my mac. Everything else is perfect but I need 4 in and 4 out. Does anybody know how to fix this?