I have bought the Leo Bodnar HID device and I’ve filled the digital button outputs and used 6 of the analogue inputs for faders/pots. I was wondering if I could put a joystick in to the two remaining analogue inputs and use it as an x-y controller. I’m really not sure if this would work.
Also, what are the 4 inputs on the bottom/middle of the unit (Up, down, left, right). Can these be used for additional buttons?
what type of joystick do you want? I have read that some pc joysticks work of analog pots, the playstation like ones from sparkfun should work.
I think those 4 middle pins are the 8 way hat switch part, ther is 4 because up + right would register as up/right position, 4way/8way arcade sticks are kinda like that.
Your board is like mine except the pins are set on yours. When you get to mapping let me know.
The joysticks from sparkfun would be perfect, I’m limited to space on the controller now.
The 4 middle pins could be used as effect buttons then? Pressing 2 or more would engage more effects?
As for mapping, that is the bit I’m most worried about. I’ve had a look through the MIDI conversion software available and they have all totally confused me.
When I get more components delivered I will post a few more photos.
ya I think thats how those would work, if you think of the 8 way hat switch or a 8 way arcade joystick most of them use 4 buttons and the diagonal directons are really just pushing up and right or up and left, ect. so i think whats going to happen is when you push up it will be button 1 (or whatever) and when you push up and right it will be button 2 and right will be button 3 untill you get around to 8… I think you will have to test that one yourself