Upgrade Issue !

DJTT Gear & Custom Mods DJ TechTools' VCI-100 Product Support
1

Upgrade Issue !

Hi everybody !

I have tried to upgrade my VCI 100 1.1.

AND… I have the 15024 Error number : Boot failed.

  • 1
    So, First when I make the workflow I put the VCI in boot mode. BUT, There are no lights on.

Is this step good or Should it be flush?

  • 2
    After, I launch my upgrade with a usb/serial cable on an opened Com (COM 5 for example).

And I have the error (see above).

So I have tried to unplugg the firmware from the VCI, and to unplugg the firmware kit and to lauch the soft with just the usb/serial cable :

And I have the same error !

So I don’t know where does come from this issue…

Could you try with your cable alone to compare results?

I am lost …

Thanks !

2

Follow the video closely and read the FAQ very carefully.

Many people have issues with USB serial so it may pay to find a computer with a built in serial port and use that.

3

Thanks for your responsiveness !

I did exactly the procedure that ean says in the video but a pop up says that a vci with no lights is not good…

So what is the good thing : No lights or flush?

Thanks for all

4

OK problem solved :

It works fine with my usb/serial.

The issue was coming from the alimentation. In fact, when I tried with my Macbook usb port (who knows my vci) it was not ok.
Then I tried with the PC usb port and it was ok.

2 solutions :

The voltage is higher?

OR

The PC has never instaled the vci so the voltage was not the same ???

Bye

5

Probably a flakey driver…
Glad you got it sorted