VCI 100 for Traktor Pro (User mapping)
Well,
here’s my TSI for you guys to use…
http://homepage.mac.com/jgcamil/FileSharing40.html
Notable things:
Top left top buttons: control beatjumps up/down
Mini black buttons: adjust loops up down
adjust beatjump up/down
4eq preset
pan knobs: filters
fx section a / b: knobs control amount of dry/wet, fx 1, fx 2, fx3 accordingly to each deck. If FX advanced is selected, they control parameters
Enjoy… leave feedback!
will try tonight..Can you make a 4 deck config?
Can I ask you why the file size is 2.1 mb ?..seems most are like 48k.
I am a little suspicious of this file. It is quite large and unix coded.
Hi claudek,
dunno why the file is 2.1 mb… maybe is because it has almost every single knob mapped! The file works perfectly with my VCI 100… dont worry.
I dont know how to make it a 4 deck tsi… can anyone help and improve on this?
ah..I mis-read and thought it was for a VCI-300..
4 deck mapping
I’m working on a 4 deck mapping right now that will work with 1.2 with similar but improved functions for mixing and simple juggling, not scratching. I will post it as soon as I can get it above 90% functional, right now it’s sitting at about 75%. Cheers
DJ Phaidon
BIG URGENT HELP:
How to assign the outer wheels to pitch bend using the cd-dj jog… i try to map it but I can only seem to pitch forward!
Have a Gig tomorrow and I need to use this!
Thx!
Pitch bend
Pitch bend mapped to the outside of the jog wheels should be fairly straight forward. Each has a separate note value which should be as follows for 1.2 and 1.3.
Left
forward A#3
back B3
Right
forward C4
back C#4
you have to manually map them for forward and backward pitch bend, because they are separate commands. Also, the learn function doesn’t work for this, or at least when I tried it didn’t.
DJ Phaidon
Thks man. I only managed to get it going fwd but not slowing down… will try it tomorrow.
Funny thing, I nuked the traktor preferences and now the pitch bend works like before…
Wasnt this supposed to be the “Pro” version???
Will give u guys update on my first gig with pro…
Pitch Bend solution for Traktor Pro
This has grown into a huge issue on the NI forums, and somewhat less so on DJTT, and I think it deserves some clarification. Only a couple folks seem to know whats up with the tempo vs. pitch bend in TPro, so hopefully this can help simmer things down. I’ll post in some other places too, to try and spread the word. Both pitch bending and tempo bending are available in TPro, though there is no dedicated MIDI command for pitch bend. Tempo bend works by allowing you to speed up and slow the tempo, without an audible change in pitch. Assign this to whatever controller you want (works fine on the outside of the VCI jog wheels). Pitch bending can be applied to the outside of the jogs using a combination of the tempo bend and cd-dj jog commands. Ean’s VCI tsi separates these functions by allowing pitch bending (cd-dj jog) with the inside of the wheel when vinyl mode is turned off. If you want an inaudible bend, just use Tempo-Bend on the outside of the wheel. If you want an audible pitch bend on the inside of the wheel, use Ean’s tsi. If you like an audible pitch bend on the outside of the wheel, do the following:
Set Tempo Bend as a Hold button. MIDI learn the outside of the jog for up. Set the value to “up”. Duplicate and learn and set value to “down”. Add a command for cd-dj jog. Learn the outside of the jog for up (same note as with Tempo Bend). Set button interaction as “inc”. Set your desired sensitivity (I use “fine”, most might want “default” or greater). If you click “auto repeat”, the bend will continue as log as the jog is rotated. Duplicate and repeat for down, this time setting the interaction as “dec”. That’s it! Pitch bending just like T3.
Hi guys
seems the pitch bend issue has been solved.
Now, I’d like to see if anybody can help me by telling me how to add a hotkey or map to have a 4deck mix option for my VCI…
Any ideas?
Much appreciated!
jg
VCI 100 for Traktor Pro (User mapping)
Thanks for the wonderful mapping… been searching for this for a long time… 1 think… how do i map the jog wheel that when i hold the jog the music stops then when i release it, it continues. Just as the jog of the original mapping of the vci-100 with traktor le. Thank you!!!
Hi jgcamil
Is your tsi file still available for download, I tried the link last night and I kept getting an error message. I need it for a mac and vci 100, although I using a pc to try to download it so maybe that was the problem. All help gratefully recieved.
Hey there Cheek Bone,
Here’s a new updated link for the tsi:
The layout controls are: EQ is a 3 eq starting at the top knob, the last knob is used to activate filters. FX are located in the top selection of the fx button with the first two knobs controlling the first two fx of fx unit 1, the second two knobs control the first two fxs of the fx unit 2. Dry/wet knob is located in the knob next to the top eq. The small knob is used to control the 3rd fx in their corresponding fx unit
Please take note of the following modifiers:
< = This modifier activates decks a&b with their corresponding transport controls / eqs /etc
z = this modifier activates decks c&d with their corresponding transport controls / eqs /etc
x = this modifiers is to activate only decks c&d for use in timecontrol mode for decks a&b. With this modifier, the eq knobs are no longer eqs and function as filters and key control for decks a&b. Transport control work for decks c&d.
Please let me know if you have any questions.
Regards,
jgcamil
Many thanks for the info and file I will give that a go.
Cheek Bone