I just built out an asus h81t csm super thin mini itx mother board with an i5 4570s and 4g ram. Im running win7 pro 64 bits w traktor 2.6.8. I have mk2 time code vinyls. My calibration circles look great. Initially, w 6ms buffer and default settings in traktor preferences there was very little, almost unnoticeable delay in audio when moving the record back and forth. I didnt change anything and now there’s a half second of delay between record movement and sound. I tried changing the buffer size and nothing. I put it at 128 samples (2.8ms) and there was no audio dropouts or glitches but the time code is still sluggish. I changed the keylock settings to “slow cpu” and this did help for a little bit. Now it makes no difference what the keylock settings are or if its on or off. Its still unusably slow. My midi controllers work fine and will move the track back and forth without lag. What else can i try and why is this not consistent? Thanks.
I have a Denon dn-x1600. its legal and scratch certified. I also tried using usb 3.0 since windows said it would run faster but no difference there either
First things first:
post ALL of the gear you use (you mentioned midi controllers and such)
post large enough pictures of your Traktor settings: 1. Audio 2. Input 3. Output 4. Transport
post your setting in Denon Asio driver utility (set them to 44khz, both the mixer and setting in asio driver)
try using just the X1600 and TT’s. delete any tsi you use (even for the X1600). if it works fine, add other controllers step by step.
if that fails, reinstall traktor (some users on denon forums reported that solved their problems with x1600)
also, just to clarify: the sound is ok, it just has a abnormal delay?
Ok so when i unplug my two cmd pl-1’s and beatstep and then restart traktor there is no lag. As soon as i plug in even one of them, the lag starts. Each controller has twice the lines of mapping code as factory. Could the extra code have something to do with it or can i just not run any other midi controllers? The x1600 midi still works w no lag tho. Thanks for the help so far.
When i unplug my two cmd pl-1’s and beatstep the lag is gone. However, after 10 min of playing today traktor wouldnt recognize the timecode and right before that the lag came back.
Could you elaborate? Do you mean you use (large) custom TSI mappings?
As I previous said: delete all mappings, add one by one. Make sure you import them properly, also assign in/out ports accordingly. Do not connect X1600 via USB HUB, plug it directly.
That was such a epic post nem0nic wrote “dirty unwashed peasants…”
On the matter of MIDI controllers - i suspect they sometimes introduce a lot of latency because a lot of midi data that is required to be read/sent - LED out messages for example.
“dirty unwashed peasants…”