hellow everybody, i have one problem whit my Xone 1D and I can’t initiate this problem no matter how hard I try. If someone know somethig about plz answer me & give me a right way to decide a problem ?!!
Problem with rotary knobs (СС32, СС 33, СС 34, СС 35, CC 36 in MAP 2 or F-5 F#5, G-5 G#5, A-5 A#5, B-6 C-6, CC 36 in MAP 1 mode) in my Xone 1D … Each of the rotary knobs on my xone 1d are assigned to a different parameters in my Traktor Pro (or in Traktor 3) and sometime whan i move one of these knobs it can move parameters of another knob!
For example:
Deck Cue Next → Deck A → Learn: Rotate the knob СС32 to the right
Deck Cue Prev → Deck A → Learn: Rotate the knob СС32 to the left
Deck Cue Next → Deck B → Learn: Rotate the knob СС 35 to the right
Deck Cue Prev → Deck B → Learn: Rotate the knob СС 35 to the left
I’ll move the knob assigned to select a cue point on deck A but what will happen is all 2 decks will move to a new cue point. This seems to happen randomly (every 1 - 2 hours) !
if someone have decided this problem plz answer me
That’s really odd..I have a couple of 1 D’s too and I remember when I assigned the top rotatory knobs to the command ‘‘loop move’’ in Traktor 3 sometimes ( after a couple of hours…) the loop was keeping moving either backward or forward like if the software went crazy!!! The only way to stop this was to click on the command ‘‘loop move’’ with my mouse/trackpad…but I remember it was quite annoying
I thought it was a software bug considering since I upgraded to Traktor Pro it never happened but maybe there’s something wrong with the actual knobs…
Have u tried to contact Allen and Heath or even look or post something in their forums?
tnx 4 your answer m8, i will try to post something in their Allen and Heath forums…
Now my Xone 1D in Technical Support in Kiev but they said that controller is ok: <<We don’t see a problem>>
I think this has something to do with the control type (button/rotary/jog). Are you using a MIDI translator, or just going straight from the 1D into Traktor?
Same problem whan i use <<MAP 1>> mode in my Xone 1D (in this mode top rotatory knobs transforms into → F-5 F#5 G-5 G#5 A-5 A#5 B-6 C-6, and another one → CC 36)! I tried many parameters assigned in rotatory knobs (in all control types → or button or rotary or jog) → problem is same
2 Discob81 or every one who have Xone 1D
Plz answer me if you have same problem this top rotatory knobs, bacause yesterday after 2 months in Technical Support in Kiev they said that: << We can give you another NEW UNIT of Xone 1D >> and I am afraid that the problem are in all Xone 1d Series !!?
Dude if u r using map 1 ( the one with light pipes on at all time) the 4 top rotatory encoders should behave like a button when u move them back and forward plus the extra midi note when u push them…so for example in traktor pro i did a mapping like this: when I push the rotatory it engage the loop function and it set to toggle, when i move them back and forward to move the loop, the interaction mode in the midi mapping is set to ‘‘direct’’ and the type of controller is set to ‘‘button’’ and the button option the value is set to ‘‘forward’’ and then dupicate thed midi command and just changed the value to ‘‘backward’’…hope it make sense
Yes sure, i know how to mapping & i do all mapping because standart or downloaded mapping files dont satisfy my style of dj-ing (sorry 4 my bad english)…
this is my *.tsi file for Xone 1D in Traktor PRO. I use Xone 1D and NumLock Keyboard (USB NumLock Keyboard for laptops like → this http://www.a4tech.com/ennew/product.asp?cid=2&scid=105&id=420 ) to cntrol my Traktor PRO… This *.tsi file is for <<MAP 1>> mode
PS
Sorry this i just entangled placed MAP 1 and MAP 2 in my posts…
Hey there yosh, I noticed you posted on A&H’s forums as well…
Don’t know where you stand on that issue you reported. Have you gotten a replacement unit from A&H ?
I got one of the black 1Ds in late august and it has that same issue you’ve reported.
Map1/Map2 : same deal.
Tried with a different usb cable.
I even tried with my midi interface and powering the xone off my other pc’s USB
Does the same thing on the other pc which is running XP (so without the xone driver).
I thought Traktor 3.4.1 was going nuts on me, but I monitored the messages with MIDIOX and guess what… same thing.
Here’s a video I made of this :
I guess I can point A&H tech support to that link as well when I’ll contact them
Xone 1D black + X-session pro => HP DV5 lappy, vista SP2, Traktor 3.4.1 ==> Gigaport HD (external mixing) ==> DDM4000 ==> HD25C-II
i am using the 1d w/ traktor 3.4121111 or whatever.
my serial is x1dx 134719
I am using a custom mapping(from scratch) for one controller + midi input from midi fader device to control effx levels. I power from computer usb.
My Endless rotaries(top) are set up for various duties but mainly ‘knob one push button’ is for 'place loop start + activate/deactivate current ‘deck’ loop length the rotary side of the control will move the loop. The second knob is for snap loop + deck loop size adjust. the last two knobs are currently unused. except for push button effect.
i was having trouble with the knob bottoms actually contacting the face plate and causing mechanichal issues with the action. so retro-fitted different encoder knobs to the device.
no other problems to speak of. EXCEPT the vbulletin tool bar isn’t allowing me any priviledges except basci posting. and it works in NI forum so im thinking im being blocked for some reason – some kind of html thingy.
plz answer me & give me a right way to decide a problem ?!! 
in my posts…
