UMC32+ Build Log
Results 1 to 9 of 9
  1. #1
    Tech Wizard suit's Avatar
    Join Date
    Sep 2010
    Location
    Queensland Australia
    Posts
    55

    Default UMC32+ Build Log

    Hi guys,
    Just thought I'd share what I've been up to for the past couple of weeks. Hope you like.

    I wanted an effects controller to complement my 2 midi fighters and make browsing through tracks a bit easier.

    Parts:
    16 pots
    12 Arcade Buttons
    1 3 way rotary switch
    1 UMC32+


    The top and bottom plates are 3mm acrylic and the sides are 12mm MDF to add a little support.



    Spray painted with a black metallic paint with a stick on stencil to try and get the led to shine through the front plate, didn't work as well as expected


    Wiring up everything. I found by wiring the 3 way switch as on off on each of their own pins it can be used to scroll menus really well as the UMC does not support encoders.


    Finished and I think it's looking good.
    Now just to map it.

    I would highly recommend using the UMC32 for any one looking to get into the DIY Midi world.

  2. #2
    Tech Guru Onimode's Avatar
    Join Date
    Mar 2011
    Location
    Citrus Heights, CA
    Posts
    579

    Default

    Interesting controller you've made here. How much was the entire project and how long did it take you?
    apc40 | ableton | ath-sj33
    deviantART | SoundCloud | facebook
    SKRILLEX IS THE BEST TECHNO DJ EVER!!! (╯°□°)╯︵ ┻━┻

  3. #3
    Tech Guru Gryz's Avatar
    Join Date
    Jan 2010
    Location
    Pennsylvania
    Posts
    690

    Default

    Awesome job!
    CDJ400s, Ecler Nuo, XD 53
    KRK RP8sFG


  4. #4
    Tech Wizard suit's Avatar
    Join Date
    Sep 2010
    Location
    Queensland Australia
    Posts
    55

    Default

    Quote Originally Posted by Gryz View Post
    Awesome job!
    Thanks mate.
    Quote Originally Posted by Onimode View Post
    Interesting controller you've made here. How much was the entire project and how long did it take you?
    All up it cost around $250 to build. I splurged a bit on the pots because i wanted ones that had a smooth action and would hold up to a bit of abuse.

    Once i had all the parts and decided on the layout i had it knocked up in a couple of weeks.

  5. #5

  6. #6
    Tech Wizard suit's Avatar
    Join Date
    Sep 2010
    Location
    Queensland Australia
    Posts
    55

    Default

    Quote Originally Posted by MiL0 View Post
    the pots look nice - where did you get them?
    I got the pots from Jaycar. The biggest downfall I can give them is there tiny solder lugs but they have a smooth motion.
    I'll let you know what breed they are when I get home from work if you like.

  7. #7
    Tech Guru DJDoubleYou's Avatar
    Join Date
    Mar 2011
    Location
    Hyperspace
    Posts
    1,267

    Default

    verry happy to hear you've chosen the UMC32 it's the best!
    MF Pro & Spectra | Kontrol S4 MKI | 2x Kontrol S1 MKI | MC-1000 | Generic MKI

  8. #8
    Tech Guru MiL0's Avatar
    Join Date
    May 2009
    Location
    Brighton / Bangkok
    Posts
    1,386

    Default

    Quote Originally Posted by suit View Post
    I got the pots from Jaycar. The biggest downfall I can give them is there tiny solder lugs but they have a smooth motion.
    I'll let you know what breed they are when I get home from work if you like.
    yes please

  9. #9
    Tech Wizard suit's Avatar
    Join Date
    Sep 2010
    Location
    Queensland Australia
    Posts
    55

    Default

    Sorry about the huge delay Milo. I had a look on those pots for a brand or some sort of marking they have Alpha on the base of them that's it.

    http://www.jaycar.com.au/productView...SUBCATID=968#1

    I hope the link helps you out a bit more.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •