I was trying to make a mapping where the effect button would pretty much turn everything into another deck A>C - B>D. But i noticed that both the effect buttons (in the EQ section) send the same midi note as the effect buttons in the effects section
Is this a common problem with the VCI-100? if so, what can i do about it?
The second problem has to do with the jog wheels of my VCI-100, the left one doesnt seem to respond correctly to the touch sensitivity while the right one works perfectly. I’ve tried to change the sensitivity on the touch sensor levels but that also didn’t solve it. It’s almost as if its broken and i didnt see any related issues on the internet.
I’m using a normal VCI-100, no changes, original mapping, not sure which firmware though, bought it pretty early in its release so probably 1 or 1.1
Not an expert but I think the midi note problem has something to do with the firmware you’re on. Apparently 1.1 and 1.2 have this problem. You’ll need to update your firmware with the djtt firmware update kit. You can get it at the store. Djtt offers the firmware for free so once you get the kit it’s pretty much a matter of downloading the firmware and following the instructions. Can someone verify? Hope this helps
Thanks for the quick reply man, i was already kind of thinking that outdated firmware could be a problem, wasn’t sure though. But thanks alot man i’l definitely look into it and give this one a try.
Any other suggestions anyone ?
does the wheel respond at all to touch? if not, there is a metal prong thing inside the touches the spindle of the wheel to conduct the touch info - it’s possible this has bent and is no longer touching the wheel. Unlikely if you’ve never taken it apart though.
and i didnt see any related issues on the internet.
