4trak + turnatable
Hello I am trying to figure out how to set up my turntables to play on 2 of the 4trak channels either via line/phono and leaving two to drag digital from the Traktor library?
I have two external usb interfaces with midi, however the 4 trak does not support midi. I also have a djm 700 in case it might help.
I appreciate the help, cheers!
This can be done without the use of additional hardware.
2 of the inputs on the back of the 4trak are labelled phono/line. Plug your turntables into these inputs and switch the switch to phono. Connect the grounding wires from the turntables to the post on the back of the 4trak. Switch the little switches above whichever channels you connected the turntables to (I can’t tell by looking at pictures which inputs they are) to Line.
Turntables should now play through these 2 channels, and the other 2 channels can be used for traktor decks.
Phono!
Phono if playing actual records, line if playing timecoded vinyl.
e/ double post.
Still phono, no?
Line = timecode.
Phono = records.
No, when playing timecoded it must be line, I would know because my set is a pair of turntables with timecoded vinyl 
The switch above the faders (from what I can tell by looking at the pics) Don’t have a phono setting, I’m guessing the line setting just switches it to whichever input you have selected on the back of the unit (line/phono).
That’s what I thought. Regardless of if I’m using timecode or vinyl I’ve always set mine to phono.
Unless your using an external soundcard for the timecode (SL1, A6 etc.) then I think it has to be set to Line…
I’ve actually never setup the timecode vinyl when we used them lol, lesson learned.
Can we just clarify this then?? When using timecode with my MC6000 I set the inputs to phono. Does it change when using an external soundcard then?? I’ve never used one so I wouldn’t know.
Well, do the inputs on the MC6000 have phono preamps?
Yes, hence a phono switch. However, if I bought an Audio 4 (for example), when I ran the outputs from the Audio 4 into the MC6000, would I set the inputs to line??