Is this the ultimate Technics customization menu?
http://www.djhenraycustoms.com/SERVICES_AND_PRICING.html
-
RCA’S REPLACED/INTERNAL GROUND PART/LABOR - $45.00
(THIS INCLUDES A NEW SET OF PREMIUM RCA’S & ELIMINATION GROUND WIRE) -
WRAP (CUSTOM) MATERIAL & DESIGN PART& LABOR - $150.00
(THIS CONSISTS OF GRAPHIC DESIN, FULL DISASSEMBLY, WRAPPING & REASSEMBLY OF UNIT AND THE COST OF HEAVY DUTY 3M CAR WRAP MATERIAL. NOTE: MUST PURCHASE NEW PITCH CONTROL DECAL WHEN GETTING TURNTABLE WRAPED) -
PITCH CONTROL METAL DECAL - $20.00
(THIS METAL DECAL MUST BE PURCHASED WHEN WRAPPING OR PAINTING) -
CUSTOM PAINT ON TONE-ARM BASE PLATE PART/LABOR - $40.00
(NOTE: THIS INCLUDES DESOLDERING OF TON-ARM AND COMPLETE DISASSEMBLY OF THE TONE-ARM BASE) -
TECHNIC DECAL REPLICAS - $7.00
(THIS INCLUDES REPLICA TECHNICS LABELS FOR TURNTABLE BASE, ONLY NEEDED WHEN TURNTABLE IS PAINTED) -
CUSTOM POWDER COATING (LABOR/PAINT) - $150.00
(THIS CONSISTS OF FULLY DISASSEMBLING THE UNIT, PREPING FOR PAINT, SENDING OUT TO GET PROFESSIONALLY POWDER COATED & REASSEMBLING) -
LED POP UP LIGHT MOD (PART/LABOR) - $35.00
(NOTE: THIS INCLUDES FULL CONVERSION KIT OF POP UP LIGHT, FROM STANDARD LIGH TO HIGHER VOLTAG LED LIGHT) -
LED PITCH CONTROL LIGHT MOD (PART/LABOR) - $20.00
(NOTE: THIS CONSISTS OF 1 NEW LED BULB INSTALLED FOR ZERO MARK ON TECHNICS PITCH CONTROL) -
LED LIGHT FOR 33/45 RPM MOD (PART/LABOR) - $20.00
(NOTE: THIS CONSISTS OF 2 NEW LED BULBS INSTALLED FOR THE 33/45 BUTTONS) -
LED ON/OFF KNOB LIGHT MOD (PART/LABOR) - $20.00
(NOTE: THIS CONSISTS OF 4 NEW LED BULBS INSTALLED FOR THE ON/OFF KNOB OF THE TURNTABLE) -
ELIMINATING CLICK ON PITCH CONTROL (LABOR) - $15.00
(THIS CONSISTS OF COMPLETE DISASSEMBLY OF PITCH CONTROL FADER & REMOBVING BALL BEARING FOR A SMOOTH PITCH CONTROL, NO CLICK AT THE ZERO MARK) -
ON/OFF SWITCH KNOB REPLACEMENT (PART/LABOR) - $35.00
(INCLUDES PART AND LABOR) -
POP UP LIGHT REPLACEMENT STANDARD BULB (PART/LABOR) - $25.00
(THIS CONSISTS OF REPLACING THE BULB ON THE POP UP LIGHT WITH A STANDARD TECHNICS BULB, NOT LED) -
TONE ARM REPLACED (PART/LABOR) - $125.00
(THIS CONSISTS OF DISASSEMBLY OF TONE-ARM AND DESOLDERING AND RE-SOLDERING OF NEW TONE-ARM IN PLACE, TESTING OUT AND RE-ASSEMBLY) -
TONE ARM REST (PART/LABOR) - $18.00
(THIS INCLUDES PART AND LABOR FOR TONE-ARM REST) -
TUNE UP (LABOR) - $25.00
(INCLUDES CALIBRATING START/STOP, PITCH CONTROL, ADJUSTING & CLEANING TONE-ARM, LUBING BALL BEARING SPINDLE (PLATTER), TESTING RCA’S & GROUND WIRE, DUSTING AND CLEANING ALL CIRCUIT BOARDS) -
MAIN CIRCUIT BOARD REPLACEMENT (PART/LABOR) - $140.00
(THIS CONSISTS OF REPLACING THE WHOLE CIRCUIT BOARD WITH A NEW ONE, COMPLETE DISASSEMBLY AND RE-ASSEMBLY OF UNIT) -
PITCH CONTROL REPLACEMENT (PART/LABOR) - $75.00
(THIS CONSISTS OF DESOLDERING OLD PITCH FADER AN RE-SOLDERING NEW PITCH FADER, CALIBRATING AND DISASSEMBLY AND REASSEMBLY OF UNIT) -
INTERNAL GROUNDING - $20.00
(THIS CONSISTS OF OPENING UNIT UP & GROUNDING FROM THE INSIDE. ELIMINATING THE EXTERNAL GROUND WIRE. WORKS GREAT WITH SERATO) -
TECHNIC DECALS FOR PLATTER - $10.00
(THIS INCLUDES 2 TECHNICS VINYL LABELS, ANY COLOR FOR YOUR PLATTER. GREAT EFFECT) -
POWER CORD REPLACEMENT (PART/LABOR) - $15.00
(THIS INCLUDES ONE BRAND NEW POWER CORD REPLACED, WHITE OF BLACK. (PART/LABOR) -
PLATTER PAINT - $25.00
(THIS INCLUDES YOUR CHOICE OF COLOR, PAINT AND LABOR) -
PLATTER LIGHTS (LED’S) HALO - $100.00
(INCLUDES YOUR CHOICE OF COLOR LED’S CUSTOMIZED UNDER PLATTER LIGHTS. PART/LABOR) -
PITCH CONTROL LED LIGHTS - $65.00
(INCLUDES YOUR CHOICE OF COLOR LED’S CUSTOMIZED UNDER PITCH CONTROL. PART/LABOR) -
PITCH CALIBRATION - $20.00
(INCLUDES LABOR FOR CALIBRATION AN DISASSEMBLY AND RE-ASSEMBLY OF UNIT) -
FEMALE RCA PORTS MODIFICATION - $65.00
(THIS CONSISTS OF INSTALLING 2 FEMALE RCA JACKS ON CABINET TO ALLOW FOR RCA CABLE DISCONNECTION. PART/LABOR) -
PREMIUM RCA CABLES 24K GOLD PLATED - $29.00
(1 SET OF PREMIUM RCA CABLES, 24KT GOLD PLATED CONNECTORS) -
STRAIGHT TONE-ARM MODIFICATION - $170.00
(THIS CONSISTS OF REMOVING ORIGINAL S TONE-ARM REPLACING IT WITH STRAIGHT TONE-ARM. COMPLETE UNIT DISASSEMBLY AND RE-ASSEMBLY IS REQUIRED. PART/LABOR) -
SPINDLE REPLACEMENT - $50.00
(THIS CONSISTS OF DISASSEMBLY AND REASSEMBLY OF UNIT. PART AND LABOR) -
PITCH CONROL CIRCUIT BOARD - $50.00
(PART AND LABOR, REMOVING OLD PITCH CONTROL CIRCUIT BOARD AND REPLACING IT WITH A NEW ONE. COMPLETE DISASSEMBLY AN RE-ASSEMBLY OF UNIT) -
RGB PLATTER LIGHTS (HALO) WITH REMOTE - $140.00
(THIS CONSISTS OF CUSTOMIZED UNDER PLATTER LIGHTS WIT REMOTE. (PART AND LABOR) -
RCA BOARD REPLACEMENT (PART/LABOR) - $25.00
(THIS CONSISTS OF DESOLDERING AND RE-SOLDERING THE CIRCUIT BOARD) -
CUSTOM POWDER COATING CANDY OR CHAMELEON COLORS - $200.00
(THIS CONSISTS OF FULLY DISASSEMBLING OF UNIT, PREPARING FOR PAINT, PROFESSIONAL POWDER COATING)
This seems like a pretty comprehensive list to me!!!
