Sorry to hear you’re having hard time to upload your mapping in Maps. I can try to upload it for you - do you also have a quick guide (JPG) with the description of the mapping?
Hi there Stewe…
I’ve been trying without success to map the encoders above the sliders to the filter adjust on the slots on Decks C and D … any Ideas. ??? When I click on learn. And move the knobs encoders nothing happens. Still traktor receive the midi signal cause it blinks right by the load spectrum. Cannot figure it out… thank’s for your invaluable help .. cheerss
Hi butterfingers,
I think that the problem might be incorrect “Type of Controller” selected on your Slot Filter Adjust commands.
If those are set as ‘fader/knob’ try changing this setting to ‘encoder’. Also note that there are two encoder modes available for this type of controller (3FH and 7Fh) try both, one should work with your hardware.
Let me know.
Best,
I’ve follow the tutorial. Deck common/ submix/filter adjust/ learn…but from there I 've tried diferrent way without get in the type of controler button to select encoder and the modes I saw them once but don’t remember how i got there.
Regarding filter slots. Mapp
Hi stewe. For some reason the encoder don’t comunicate with the software. So I ended up using the sliders again pn a different bank wich will add a few clicks on the TFP. But still able to use. The slots filters … but It puzzles me that the encoders cannot be mapped. Cheeerssss…
Hey Butterfingers, it may be that encoders are not implemented in MIDI.
Did you test your controller with some other DJ software or midi monitors?
I did and they are fully mapable on serato dj. I use them to assing effects on the three banks , I copied the signals midi cc’s. They are as follow. Ch 1 cc00 , Ch1 cc01 , Ch 1 cc02, And so on. What puzzles me is like I said before. You could see the blink on the. Little box next to the load espectrum that traktor listen to the encoder when rotated. But doesn’t learn the signal when tried to map it to the filters or any other assignment…
Tfp update…
Hi Stewe/// so finally I figure it out about the encoder on the TFP the problem was that they needed to be assigned as MIDI on ARSENAL (there’s Midi,Mackie,and HUI) i order to be able to map them once I did that they worked like a charm with the only disappointment that,they act too fast as you turn the encoder and tried to adjust the rotary speed and the acceleration and still you have to minimally touch the encoder … but there was progress. wil keep trying to implement it next stop LED feedback …do you think is possible.? cheeerss. mate and mix onn…
That’s good to know! Is there an option to set different speed/resolution for the encoders? If so set them to default setting.
Add IN > Deck Common > Submix > Slot Filter Adjust
Type of Controller = Encoder
Interaction Mode = Relative
With that set up you will be able to adjust the the value via the rotary sensitivity under “Rotary Encoder” section.
Hi Stewe… turn out that I was treating those knobs as “Encoders” but. They. Are knobs so voila’. They are working just fine. Now…thank’s for your support. You’re awesome. Cheerrsss .. mate. And Mix On…
Cool - glad to hear you have it sorted out now 
M Audio Trigger Finger Pro for Traktor Scratch Pro 2
Hello either butterfingers or stewe may ask to send have the latest/best version of the trigger finger pro for tractor midi file since, I too would like to use it in my current setup for traktor scratch pro 2. Just send me a email message of the current best version file to use my m audio trigger finger pro on traktor scratch pro 2, send it to kasvtp@gmail.com
thank you.
I’ll have to leave that to butterfingers as I don’t have the unit to test the mapping.
Best,
Hi Stewe. Wanted to drop a line. as Always grateful for the help and support when mapping the TFP. now I’m on another venture. using Flashflodded’s IG mapping on bank. 4. although just Reasign the comands to the controller for some reason I dont achieve to use Modifiers condition to use four buttons to play them as a piano kind without the effect to turn off until the release of the las button on th eBeatmasher. he explain it on the tutorial. and I have done it but the Software doesn’t respond to the comand. any. input would be appreciatted. cheers mate and Mix On. Butterfingers
My guess is that your buttons/pads are not sending out the value of 127 on Note ON message. For some reason Traktor expects value of 127 for some of the button mappings. Namely “Inc/Dec” and “Invert”.
Check your midi editor software and see if you can tweak the value for Note On and Note OFF messages.
OFF = 0
ON = 127
Also try doing same mapping on your computer keyboard to test if the modifier mapping was done correctly.