I use logitech speakers on my xp 32bit system. I have installed the latest RMX drivers and use traktor 1.24. Everything is mapped correctly and working.
The problem is: Sound only comes out of one output, either my speakers or (headphones, connected through rmx). I can select deck a or deck b with the 'source 1& 2) buttons on the rmx which is good but how do I get it working properly? I have played around with the input / output part in traktor but no luck
Also, when i plug a mic into the rmx, nothing happens. I have pushed the ‘mic on off’ button on the rmx but no luck
From what I can see from your screenshots, you seem to be using the soundcard of the Rmx, so I’ll assume that your speakers are connected to the Output 1/2 on the back of the Rmx ?
If so, then should have a configuration that looks like this :
[ATTACH]2246[/ATTACH]
Your main mix will come out of your speakers and monitoring out of the headphone.
As for the microphone, do you want to use it only for talk-over or for recording ?
For the Talk-Over: pushing the Mic On/Off button, will send the MIC signal directly to the main output. That’s it.
If you want to use the microphone for recording:
you first need to select the microphone as source for input 1/2 in the Rmx control panel
[ATTACH]2247[/ATTACH]
Then in Traktor Input configuration, select input 1/2
[ATTACH]2248[/ATTACH]
Your microphone signal should normally be available for recording.
If you’ve mapped the Source 1 button to “Input Select”, then you can toggle between external source (the microphone) and internal (mp3).
Aslo keep in mind that when using the microphone as external source, you cannot use the Input 1/2 on the back of the console at the same time.
