VCI-100 SE 3_1 mapping (updated)

DJTT Gear & Custom Mods DJ TechTools' VCI-100 Product Support
1

VCI-100 SE 3_1 mapping (updated)

a newer version of this mapping is now available in this thread:

2

nice first one here!!! I hope this tsi loads for me!!

Thanx Ean

SS

3

OK so big fix I think that needs to be made :

Have the Slice + Jogwheel reset each time!

I know that in the beta thats how it was, why not now?

SS

4

Thank you so much Ean!!

5

I noticed the Low/High Cut Filter Knobs stop working when FX Mode is “on”. Is this because we don’t have any FX module available in order to filter while FX mode is enabled or is it a bug?

Bug or not, I’d suggest the following mapping while FX mode is “on”:

  • moving the FX parameter assigned to the volume faders to these knobs in order to allow volume control while on FX mode
    OR
  • moving the FX parameter assigned to the pitch fader to these knobs in order to be able to add transposing to our FX performance.
6

It´s working for me now! Had two versions of Traktor installed and kept opening the old 1.2.2 version so it didn´t import the tsi. very very :open_mouth:

New version new tsi everything fine now i only have to start playing with it.

things learned
the 3.0 setup defenitely only runs with Traktor 1.2.4.
you can have 2 working versions of Traktor on a mac wich can come handy with future updates
i should remember where i put things before trying to upgrade

7

Found out that somehow the XFade had the same controler set as the DRY/Wet knob on Fx1
Deleting the Control for dry/wet fixed the prblm

8

I’m with you here, it was mentioned in the last thread. Its been rdone like this deliberatley though. Can’t be to difficult to change yourself i dont think.

9

I think i found a next thing there´s that problem that on Deck A/D u have to press sync twice to sync as described earlier by smbdy in the old 3.0 thread.

I suppouse this is because the Sync Out on Deck A (Ch2 Note A#4) misses is´t second modifier i added M4=0 as second Mod and it seems to work now.

Hope this is a solution and doesn´t bring up other prblms will keep on checking

10

Workaround to open “defekt” File

I think there is something went wrong with zipping…

The solution:

  1. download the file from Ean
  2. extract the File in the zip (it has no extension!)
  3. now you can open the extracted file with winrar (or add extension .zip)

now you should have 2 directoris one for mac an one for win…

everythin should work now!

but only if you use traktor 1.2.4 - if you have an oder Version you could not import controller settings!

11

Shift transport buttons from 1st 3.0 beta

Hey Ean,

I really liked the potential of using shift to access additional functions on the transport buttons. I assume you took them away because of conflicts. Do you see them coming back?

Also, as a practice, it would be great to see a pdf of the tsi for us os x folks.

thanks as always,

12

uhm .. did the explanation for how to do the FX routing get cut out of the 3.0 post? anyways its also not in this thread ..

ah figured it out .. FX1/2 can be assigned by pressing the routing button and then the A/B/C/D buttons. i guess 3/4 are reserved for the magic buttons anyways.

found a bug :
when pressing the sync button to on the LED turns blue, however the LED toggles to off when pressing shift+sync in order to enable key lock. so the LED state can be on or off regardless of the sync/key lock setting.

13

Am I the only one having problems with the file… it says 203.2kb on ean’s link but mine says 184kb???

14

nice work!!! i think this has puzzled quite a few of us.i would never have worked this out so props to you for taking the time to explain.

15

add .zip onto the extracted file,it will then turn into a zip file, then extract it.case closed.:wink:

16

Hey Guys, Please re-download the new TSI files. We have updated them to version 3_1_2 as 3_1 had a nasty bug where fader fx would disable deck B! :0

That and the pitch fader lengths are now fixed- plus you can download the TSI directly.

17

is there a way to drop a cue point on the fly now.:confused:

18

Shift plus CUE will drop a cue.

We can add them- there are not conflicts, I just wanted to keep things simple and straight forward.

It resets one value but leaves the glitch in the same place where you last left the jog wheel- to me that config is more musical and easy to use but if no one likes it we can change it back.

19

Shift Transport Buttons

Please put them back - they were great.

Also a great opportunity for people to customize them per their liking.

20

I really dig the new layout. any word on when the overlays will hit the store?