vestax vci 100 firmware Error No 15024
I tried upgrading from 1.3 to 1.4 today and was unable to do so.
I bought my vci 100 used and it came with 1.3 loaded onto it and also came with an upgrade kit and serial to usb cable.
I installed the drivers for the usb to serial cable and have been following the upgrade video to the T but I keep getting this error:
Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'H8/3052F' on 'COM5'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM5' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Attempting 4800
Attempting 2400
Attempting 1200
Error No 15024: Boot failed
I tried switching from COM4 to COM5 in my usb to serial and it still seems to not work. I am unsure if the VCI is loading into boot mode but i following the instructions on the video exactly as they said.
- Start with everything unplugged
- plug in upgrade kit PCD into header
- Plug usb to serial cable into PCB and computer
- With power off on the VCI plug the VCI into the computer
- Turn VCI on it should be in boot mode
But when i look at the top of the VCI it still has lights on and the jogs are not red… Does this mean it is not in boot mode?
I am on windows 7. Has anyone gotten this to work for them?