Akai LPD8 and Traktor Pro(All-in-one controls)
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it’s value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8’s software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 – Play/Pause [Deck A]
Pad 2 – Sync [Deck A]
Pad 3 – Keylock [Deck A]
Pad 4 – Monitor [Deck A]
Pad 5 – Play/Pause [Deck B]
Pad 6 – Sync [Deck B]
Pad 7 – Keylock [Deck B]
Pad 8 – Monitor [Deck B]
Pads (Pad):
Pad 1 – Hotcue 1 [Deck A]
Pad 2 – Hotcue 2 [Deck A]
Pad 3 – Hotcue 3 [Deck A]
Pad 4 – Hotcue 4 [Deck A]
Pad 5 – Hotcue 1 [Deck B]
Pad 6 – Hotcue 2 [Deck B]
Pad 7 – Hotcue 3 [Deck B]
Pad 8 – Hotcue 4 [Deck B]
Knobs
K1– Select Effect 1 [Unit 1 Chained FX]
K2– Select Effect 2 [Unit 1 Chained FX]
K3– Select Effect 3 [Unit 1 Chained FX]
K4– Select Effect [Unit 2 Advanced FX]
K5 – Pitch [Focus]
K6 – Input Fader [Deck A]
K7 – Input Fader [Deck B]
K8 – Crossfader
Program 2 (Effect Controls)
Pads (CC):
Pad 1 – Effect Unit 1 On [Deck B]
Pad 2 – Effect Unit 2 On [Deck B]
Pad 3 – Empty
Pad 4 – Empty
Pad 5 – Effect Unit 1 On [Deck A]
Pad 6 – Effect Unit 2 On [Deck A]
Pad 7 – Empty
Pad 8 – Empty
Pads (Pad):
Pad 1 – Effect On [Unit 2]
Pad 2 – Effect Rst [Unit 2]
Pad 3 – Effect Button 1 [Unit 2]
Pad 4 – Effect Button 2 [Unit 2]
Pad 5 – Empty
Pad 6 – Effect 1 On [Unit 1]
Pad 7 – Effect 2 On [Unit 1]
Pad 8 – Effect 3 On [Unit 1]
Knobs
K1– Dry/Wet [Unit 2]
K2–Effect Param 1 [Unit 2]
K3– Effect Param 2 [Unit 2]
K4– Effect Param 3 [Unit 2]
K5 – Dry/Wet [Unit 1]
K6 – Effect 1 Control [Unit 1]
K7 – Effect 1 Control [Unit 2]
K8 – Effect 1 Control [Unit 3]
Program 3 (Mixer Levels)
Pads (CC):
Pad 1 – Gain Kill [Deck B]
Pad 2 – Hi Kill [Deck B]
Pad 3 – Mid Kill [Deck B]
Pad 4 – Low Kill [Deck B]
Pad 5 – Gain Kill [Deck A]
Pad 6 – Hi Kill [Deck A]
Pad 7 – Mid Kill [Deck A]
Pad 8 – Low Kill [Deck A]
Pads (Pad):
Pad 1 – Empty
Pad 2 – Empty
Pad 3 – Empty
Pad 4 – Empty
Pad 5 – Empty
Pad 6 – Empty
Pad 7 – Empty
Pad 8 – Empty
Knobs
K1 – Gain [Deck A]
K2 – Hi [Deck A]
K3 – Mid [Deck A]
K4 – Low [Deck A]
K5 – Gain [Deck B]
K6 – Hi [Deck B]
K7 – Mid [Deck B]
K8 – Low [Deck B]
Program 4 (Loop Controls)
Pads (CC):
Pad 1 – Play/Pause
Pad 2 – Loop In Set Cue
Pad 3 – Loop Out
Pad 4 – Active
Pad 5 – Play/Pause
Pad 6 – Loop In/ Set Cue
Pad 7 – Loop Out
Pad 8 – Active
Pads (Pad):
Pad 1 – Hotcue 5 [Deck A]
Pad 2 – Hotcue 6 [Deck A]
Pad 3 – Hotcue 7 [Deck A]
Pad 4 – Hotcue 8 [Deck A]
Pad 5 – Hotcue 5 [Deck B]
Pad 6 – Hotcue 6 [Deck B]
Pad 7 – Hotcue 7 [Deck B]
Pad 8 – Hotcue 8 [Deck B]
Knobs
K1 – Loop Size [Deck A]
K2 – Empty
K3 – Empty
K4 – Empty
K5 – Loop Size [Deck B]
K6 – Empty
K7 – Empty
K8 – Empty
ads (CC):
