Yes, you aggregate the two CDJ’s together to appear as one interface in traktor. 2 x USB from cdjs into laptop. Laptop sends HID info to CDJs as well as audio to their respective audio interface. Sound then goes to mixer at line inputs. Alterantively could use them just as controllers and hook up a third usb from a 850/900. Using just the two CDJ route allows for swapping out easier with other traktor dj’s. My biggest thing for this HID is that i don’t have to look at the laptop screen with this set up. The laptop can be off to the side with lights dimmed and screen tilted away. ![]()
The way I’m understanding it is, three to five usb for each CDJ and mixer, the audio is exported using the 900’s soundcard. Looks like there should be a way to get it to link, but it don’t from what I see. That would be hot, USB from the mixer, the rest some kind of bridge from that, but that is next level stuff from what I see, at least this all almost there, which is closer than it was a year ago. All this means roll into the club, set up a powered hub, laptop, plug in their CDJ and mixer via USB, your X1, midifighter or what ever, then jam out. It really shouldn’t be that long of a transition and can be pretty quick, but still tinkering with things more than I like even though I’m super excited.
Wow, this is cool!
(Though using 2000s as just MIDI controllers with built-in audio interfaces seems excessively expensive!
)
this isnt the way its made out in the video
so the decks were set up to play cd’s and all you did was plug usb into the 2 cdj’s and switch them to usb mode? this is what im hoping its like, if it is im buying some 400’s and a cheap djm
If you connect the 2 cdj’s via usb to the laptop and traktor and then they send the sound to the mixer, does it even have to be a pioneer mixer?
The way i saw it, it was explaining two different ways of connecting.
-
Using the cdj’s to the laptop to pull music from it and play through there sound card.
-
Setting up the djm as a scratch certified mixer. i.e. how to use the djm as mixer with a traktor audio card built in.
thats the way i interpreted it. thinking im going to trade in my s4 for some 400’s, an X1 and probably a dim-250. once the cdj’s are hooked up if you add an X1 i see the mixer only really acts as a crossfader/monitor/eq box so no need for anything fancy
It was not the objective/reason of the update. I don’t have any soundcard because I always use my S4. Now I can leave it at home and use the club mixer and CDJ’s…
I, for one, think this is completely awesome. From a technical standpoint it eliminates a hell of a lot of complexity for Traktor users to play out. A few outlets and some usb cables and you’re good to go. With the X1\F1, Xone 1d, MF line, the new Behringer modulers I see MAD potential to roll up with a really compact setup and have infinite options for workflow.
What’s even more awesome to me is that I can see this being the tipping point for Traktor being viewed as a “real” option. There’s still this perception that if you don’t roll up and do it on the CDJ’s you aren’t a “real” DJ. This kicks that door wide open. I can’t fathom how the snobbery can continue when a Traktor DJ can roll up to the club gear, plug in a few USB cables and do it to it. My hope is that it becomes just about “who can rock the house” instead of “who can rock the house using exactly this equipment and workflow”.
Good times ahead
So just to clarify, I can rock up to a club with an X1 and, assuming they have CDJ 900/2K, just plug them straight into a laptop with Traktor and go crazy?
hmmm, maybe do a little more research before that. If the venue doesn’t have a DJM900, then you need to learn how to create an aggregate sound device with your laptop (making the 2 cdj separate soundcards into one).
I have played alot with CDJ900/DJM900/CDJ2000/DJM800 combos, and would not recommend a traktor controller user just show up and expect it to work. Being a modular setup, there are more variables to go wrong, and if you dont know your stuff, there is alot to go wrong. Having said that, i do think CDJs and DJM900 is the most premium traktor experience i have ever had.
My bad, but after watching again yes you can use them as audio interfaces with aggregating ![]()
Right, so on OS X the aggregation is performed by an utility you can get from Pioneer.
On Windows (which is what I’m using) the CDJ driver from Pioneer does this for you. You then select CDJ 1/2 L/R and so forth in your audio output routing panel. Wayyyyy simpler than using Asio4all - you don’t have to do anything outside of the output routing.
The numbering happens depending on the order in which you usually plug in the devices and I don’t think it changes on the fly if you swap things out ![]()
The 2000s were still plugged in with RCAs to the mixer which was a Xone 92. Obviously, with the audio coming out of the actual CDJs, the mixer is irrelevant.
NI is actually mentioning the CDJ400 in that video and I wonder how tight the jogs/pitch faders are after the quite generic “improved CDJ integration” item in the changelog for 2.5.1.
I never got a chance to use 400s but I might have to play a gig with only that and no TTs, might as well rock the HID.
I have not tried out 2.5.1 with 400’s, but with previous versions the jogwheel response was pretty crappy. SSL had a MUCH tighter response. I was surprised to hear they mention them aswell.
Correct, there is middleware from Pioneer that needs to be installed to get the mixer to act as an external soundcard. I don’t know if it needs to be running at all times though–maybe it sends firmware changes to the mixer depending on whether you want HID or timecode control.
You can now use ANY mixers soundcard with these CDJs in Advanced HID mode WITHOUT the need for Traktor Scratch certification as they bypass the need for timecode and you get the full Scratch functionality… I’ve been testing this with 2 x CDJ2000’s and and an Allen & Heath DB4 and it works like a dream.
Plus running Rekordbuddy keeps your music collection in sync in both Rekordbox and Traktor so all playlists, beatgrids, cue, hotcue and loop points are exactly the same in both applications. Clever stuff.
so the mixer definitely doesnt need connecting to the laptop at all? the cdj’s and mixer are connected as though theres no laptop?
I wish there were built-in hubs between all of the Pioneer devices or at least some way of linking them altogether into one single connection to the computer. Still seems clunky having to connect 3-5 USB devices to the laptop just to get this all working.
if your mixer has a soundcard that you want to use instead of the onboard cdj soundcards then yes it needs to be connected and set up as the output from traktor.
if your mixer doesn’t have a soundcard then you will just use the cdjs soundcards instead.
and the audio just goes to the mixer via rca cables as if there was no laptop involved? just trying to get my head fully around it
yes, that’s exactly how it works…