VCI-300+Traktor Pro - Setup Jog Wheel & LED List
I couldn´t find the answer in the forum so i got to dig it out myself:
With the use of one Modifier per Jog Wheel it is possible to have a Itch like way of using the Jog Wheel. The only drawback is that you have to press the “platter” if you want to “scratch” when you are not playing.
- Add “Modifier #1” and assign it to the left “platter-press” (B5) with mode Button & Hold, Set Value=1
- Add “Scratch On” and assign it to the left “platter-press” (B5) with mode Button & Hold
- Add “Scratch” and assign it to the left Jog Wheel (CC60 + CC02) with relative mode and Mod#1 Condition 1
- Add “Tempo Bend (Stepless)” and assign it to the left Jog Wheel (CC60 + CC02) with relative mode and Mod#1 Condition 0
Repeat the same for the right Jog Wheel with Modifier #2.
This Setup is pretty simple, you may adjust the sensibility to your need. The most important part for me was: When the Deck is playing i may stop it by pressing the platter and start it again by releasing it.
Using Asio4All with a buffer size of 64 and no latency compensation makes it almost feel like Itch.
Also here is a List of the LED´s Midi Map (You have to add one octave to the notes, as traktor numbers Midi Notes differently from Max/Msp):
c1 KeyLock Left ------------------------------left
c#1 AutoTempo ------------------------------left
d1 scratch
d#1 shift
d1 censor
f1 auto loop
f#1 half
g double
g#1 crates
a1 pfl a
a#1 files
b1 scroll
c2 browse
c#2 pfl b
d2 half ------------------------------right
d#2 key lock
e2 censor
f2 auto loop
f#2 double
g2 shift
g#2 scratch
a2 auto tempo
a#2 Pitch Center ------------------------------left
b2 pitch up
c3 pitch down
c#3 pitch up ------------------------------right
d3 pitch down
d#3 pitch center
e3 DATA LED ??
f3 c1 red ------------------------------left
f#3 cl1 red
g3 c2 yel
g#3 cl2 yel
a3 c3 blue
a#3 cl3 blue
b3 c1 green
c4 cl1 green
c#4 c2 green
d4 cl2 green
d#4 c3 green
e4 cl3 green
f4 c1 red ------------------------------right
f#4 cl1 red
g4 c2 yel
g#4 cl2 yel
a4 c3 blue
a#4 cl3 blue
b4 c1 green
c5 cl1 green
c#5 c2 green
d5 cl2 green
d#5 c3 green
e5 cl3 green
f5 meter top ------------------------------left
… meter
e6 meter bottom
f6 meter top ------------------------------right
… meter
e7 meter bottom
f7 cue ------------------------------left
f#7 play
g7 cue ------------------------------right
g#7 play
a7 jog blue ------------------------------left
a#7 jog red
b7 jog blue ------------------------------right
c8 jog red
Hope this helps some people, who had the same first shock with this great piece of equipment.
When somebody is interested for a .tsi that is setup for using an external mixer with traktor&VCI-300 just pn me.
)